Computing Hardware · 8 min read · 2026-11-18
Modern browsers, development tools and multitasking have changed what a comfortable computer needs. Sixteen gigabytes still works, but the evidence increasingly makes 32GB the practical target for demanding everyday work.
Radio & IoT · 6 min read · 2026-10-17
A practical comparison of DIY ESP8266 experiments, PIR and mmWave sensing, ESPHome, Home Assistant and dedicated presence products—without confusing detection with reliability.
PCB Bring-Up & Hardware · 9 min read · 2026-10-01
The display firmware could be perfectly written for the wrong panel if the exact part number was not reconciled with the schematic.
PCB Bring-Up & Hardware · 9 min read · 2026-09-16
Speaker and microphone failures were easy to discuss as one audio problem even though playback and capture used different codecs and different analog paths.
PCB Bring-Up & Hardware · 9 min read · 2026-09-10
Field feedback described the EVT speaker as very tinny even though the digital voice path and codec communication were functioning.
PCB Bring-Up & Hardware · 9 min read · 2026-07-30
A product can have a USB-C connector and still lack a reliable programming/recovery path for failed units.
PCB Bring-Up & Hardware · 9 min read · 2026-05-19
A prototype can be assembled carefully by an engineer even when its geometry is too ambiguous for repeatable production.
PCB Bring-Up & Hardware · 9 min read · 2026-03-30
The proposed encoder had push and six pulses per revolution, but its datasheet listed zero rotational detents while the product required clear tactile detents.
PCB Bring-Up & Hardware · 9 min read · 2025-12-14
Moving quickly toward EVT created pressure to interpret every interim approval as a final product freeze.
PCB Bring-Up & Hardware · 9 min read · 2025-08-22
A BUSY timeout is easy to interpret as a display-driver bug, but the panel can remain busy or silent when its power rail or flex connection is wrong.
PCB Bring-Up & Hardware · 9 min read · 2025-07-06
Audio debugging depended on exact MCLK, BCLK, LRCK, data and control wiring, yet pin values could easily be copied from stale board revisions.
PCB Bring-Up & Hardware · 9 min read · 2025-06-13
Hardware and firmware teams could each make locally reasonable decisions that violate assumptions on the other side unless ownership and interfaces were explicit.
PCB Bring-Up & Hardware · 9 min read · 2025-05-18
Board bring-up became risky whenever the schematic, BOM, datasheet package and firmware assumptions described different parts or behaviors.
Observability & Monitoring · 1 min read · 2025-04-26
A disk can have plenty of free capacity while the underlying SSD is reporting temperature or device-health problems.
PCB Bring-Up & Hardware · 9 min read · 2025-03-27
Receiving the PMIC datasheet did not answer which regulator powered each subsystem, what came up before firmware, or how the product behaved on battery and USB insertion.
PCB Bring-Up & Hardware · 9 min read · 2024-08-28
A factory test that says PASS without linking the result to a specific unit, programmed identity and relevant component history is weak forensic evidence.
PCB Bring-Up & Hardware · 2 min read · 2024-07-10
Seeing a prototype power on is a major relief, but engineering validation requires knowing which questions the board has actually answered. One LED cannot validate power, audio, radio behavior, and long-duration operation at the same time.
PCB Bring-Up & Hardware · 9 min read · 2024-05-30
Factory and service workflows need a path that still works when firmware, provisioning or normal UI cannot start.
PCB Bring-Up & Hardware · 10 min read · 2024-02-04
The single RGB status LED looked like a simple GPIO peripheral, but the schematic powered the WS2812B-2020 from a switched VBAT-derived RGB_VDD while its data came from the ESP32 domain.
Observability & Monitoring · 1 min read · 2023-11-13
A small Mac mini running many containers can hit thermal constraints before ordinary CPU graphs explain why performance changed.
PCB Bring-Up & Hardware · 9 min read · 2023-06-30
Historical board notes associated amplifier enable with GPIO17, while later verified board-path evidence showed the physical speaker PA controlled through TCA9555 EXIO08 in the working implementation.
PCB Bring-Up & Hardware · 2 min read · 2023-06-25
A board antenna gives clues about expected behavior, but in a real product the surrounding objects become part of the system. The enclosure, cables, metal parts, and device placement can all change the result. An open-board test is not a guarantee for the finished enclosure.
PCB Bring-Up & Hardware · 9 min read · 2023-05-28
Peripheral connections on ESP32-S3 strapping pins can influence reset before application diagnostics have a chance to run.
PCB Bring-Up & Hardware · 9 min read · 2023-05-17
The Minewing ES7210 wrapper labeled four int16 positions as four physical channels, but the host transport packing did not match those names.
PCB Bring-Up & Hardware · 9 min read · 2023-01-06
Unused AXP2101 regulator pins could appear electrically unconnected while still being enabled internally by default or firmware.
PCB Bring-Up & Hardware · 9 min read · 2022-10-22
The prototype’s physical power behavior risked becoming a permanent architecture even though the production product needed deliberate momentary power/wake semantics.
PCB Bring-Up & Hardware · 9 min read · 2022-05-09
Seeing four 16-bit-looking positions in memory made true four-slot TDM seem like the natural host configuration.
PCB Bring-Up & Hardware · 9 min read · 2022-01-16
Seeing ES8311, ES7210 and AXP2101 on the I2C bus was necessary but insufficient evidence that the audio and power architecture worked correctly.
PCB Bring-Up & Hardware · 9 min read · 2021-07-10
AEC debugging initially suffered because the channel expected to carry a far-end reference appeared almost dead.
PCB Bring-Up & Hardware · 9 min read · 2021-01-13
The microphone count could not be chosen only by firmware or only by mechanical design because it changes acoustics, channels, BOM, placement, assembly and test.
PCB Bring-Up & Hardware · 9 min read · 2020-11-15
Display and audio bring-up failed more predictably once regulator names were tied to actual product loads instead of generic PMIC outputs.